Ronin-MX

Ronin-MX

Gresco UAS
Modified on: Mon, 2 Jul, 2018 at 9:48 AM

FAQ

Cinematic film making demands rapid setup and a host of camera configurations. The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A re-positioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.

General

Built-In Functions

Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Aerial Mode
-Jib or Wirecam Mode

 Built-in, independent IMU module

 DJI Specialized Gimbal Drive Motors with Encoders

 Bluetooth Module

 USB Connection

 2.4GHz Receiver

 Temperature Sensor

 DJI Advanced 32-Bit DSP Processor

 D-Bus Receiver Supported

Mechanical & Electrical Characteristics

Working Current
Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Run Time
3 hours
Operating Temperature
 5° F ~ 120° F (-15° C ~ 50° C)
Weight
Including handle bar: 6.11 lb (2.77 kg)
Including vibration absorber: 4.74 lb (2.15 kg)
Gimbal Dimensions
Excluding handle bar :
280 mm (W) x 370 mm (D)x 340 mm (H)
Including handle bar :
560 mm (W) x 370 mm (D) x 440 mm (H)

Peripheral

Camera Tray Dimensions
Maximum depth from the center of gravity on camera base plate: 120mm
Maximum height measured from top of camera base plate: 130mm
Maximum width: 160mm
Accessory Power Connections
12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power
4S Ronin-M Battery
Connections
2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0
PC Assistant Software Requirements
Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements
iOS 7.1 or above; Android 4.3 or above

Working Performance

Load Weight (Reference Value)
10 lb (4.5 kg)
Angular Vibration Range
± 0.02°
Maximum Controlled Rotation Speed
Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range
Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°
Controlled Rotation Range
Pan axis control: 360°
Tilt axis control: +45° to -135°
Roll axis control: ± 25°


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.